Copper PELCO® FIB Lift-Out Grid TEM Grids Select:2 wide posts Anti-Capillary 5TTHX 118mm NM-SS 0

Anti-Capillary 5TTHX 118mm NM-SS 0

This SCM cantilever holder supports the Scanning Capacitance Microscopy (SCM) application module for Dimension/ BioScope SPMs

silicone Petri dish covers protect the scanner and prevent evaporation of fluid during scanning

4 ohms/sq/mil (25µm)

Copper PELCO® FIB Lift-Out Grid TEM Grids Select:2 wide posts Anti-Capillary 5TTHX 118mm NM-SS 0DESCRIPTION Copper PELCO FIB Lift Out Grid TEM Grids The typical thickness of the copper lift out grids is 35m + 5m. The Cu FIB lift out grids also have a thinner ridge on the inside, where the lamellas can be attached and are protected when stored. Available with either one or two wider v shaped posts or four narrow flat posts with identification number etch through. Use single or dual wider posts for attaching single lamellas or the four posts for