UP STOP DOWN Push Button Manual Switch for DC Actuator & Motor Controller (Model 0040024) Linear Actuator C Synchronous Control Kit Connect two wires of the

Connect two wires of the motor or the linear actuator to terminals <Motor> of the receiver

you can also choose to retain the original standard retraction length of 160 mm

Retraction Length: 885 mm (center distance between two mounting holes when the linear actuator is fully retracted)

} This is a high-speed linear actuator with a 250mm stroke

UP STOP DOWN Push Button Manual Switch for DC Actuator & Motor Controller (Model 0040024) Linear Actuator C Synchronous Control Kit Connect two wires of thePackage Include: 1 x Manual Switch 1 x User Manual Introduction: This manual switch has three pushbuttons UP STOP DOWN. Each button has a set of normally open contacts. You can connect this manual switch to wired control terminals of the receiver, and then use it to control the DC motor or the linear actuator. Product Description: Three buttons: UP, STOP, DOWN Work Mode: Momentary Button diameter: 30 MM Hole diameter: 22 MM Each button is equipped