6405C3 NSK Open Deep Groove Ball Bearing 25mm inside x 80mm outside x 21mm wide Sealed r min 1 mm

r min 1 mm

No of Teeth: 24

radial: 193000 N

d1 45 mm Shoulder diameter of inner ring

6405C3 NSK Open Deep Groove Ball Bearing 25mm inside x 80mm outside x 21mm wide Sealed r min 1 mmNSK Pressed Steel Cages Single row deep groove ball bearings are the most common type of rolling bearings. Their use is very widespread. In addition to open type bearings, these bearings often have steel shields or rubber seals installed on one or both sides and are prelubricated with grease. Also, snap rings are sometimes used on the periphery. As to cages, pressed steel ones are the most common. For big deep groove ball bearings, machined brass