6214 NSK Open Deep Groove Ball Bearing 70mm inside x 125mm outside x 24mm wide Closed Outside length: 2002mm

Outside length: 2002mm

db min 77 mm Minimum cavity diameter of the sleeve

B - Bearing/Inner ring width 24 mm

AS5578 Axial bearing washer

6214 NSK Open Deep Groove Ball Bearing 70mm inside x 125mm outside x 24mm wide Closed Outside length: 2002mmNSK Pressed Steel Cages Single row deep groove ball bearings are the most common type of rolling bearings. Their use is very widespread. In addition to open type bearings, these bearings often have steel shields or rubber seals installed on one or both sides and are prelubricated with grease. Also, snap rings are sometimes used on the periphery. As to cages, pressed steel ones are the most common. For big deep groove ball bearings, machined brass