Receiving clamp C3 (internal diameter 52mm) Tester This case is designed for

This case is designed for storage and transport of the meter and its accessories

Tested parameters can then be recorded in the device's memory

Window mode: makes possible to set an upper and lower limit within the measurement result should remain

13 Ω…1999 Ω acc

Receiving clamp C3 (internal diameter 52mm) Tester This case is designed forDescription The clamp is used to measure alternating currents. The maximum diameter of the tested conductor is 52 mm. It is terminated with a 5 pin plug, compatible with Sonel devices. Using of the clamp eliminates the need to disconnect control connections, significantly reducing the testing time. This clamp allows user to determine the type of current flowing through the tested earthing element and to check the resulting voltage drop. With the help