16015C3 NSK Open Deep Groove Ball Bearing 75mm inside x 115mm outside x 13mm wide Closed 1 mm Outside Diameter (de)

1 mm Outside Diameter (de) 292 mm Diameter Over Chain (A) 296 mm Taper Lock Bush 1210 Type 1 Overall Length (L) 25

Constant speed ratio

Outside length: 12830mm

Permissible rotational acceleration for oil lubrication 579 m/s

16015C3 NSK Open Deep Groove Ball Bearing 75mm inside x 115mm outside x 13mm wide Closed 1 mm Outside Diameter (de)NSK Pressed Steel Cages Single row deep groove ball bearings are the most common type of rolling bearings. Their use is very widespread. In addition to open type bearings, these bearings often have steel shields or rubber seals installed on one or both sides and are prelubricated with grease. Also, snap rings are sometimes used on the periphery. As to cages, pressed steel ones are the most common. For big deep groove ball bearings, machined brass