1.75 OD Pole Pin- Plastic 3/8" 2.50OD Seasonal installations should replace tie-down

Seasonal installations should replace tie-down straps annually or sooner if any damage is noted

5" Schedule 40 aluminum pipe

0" diameter stake and a tensioning nub welded to the stake hole riser that can be used for tensioning the tent fabric down to the baseplate

Clamp is engineered for a 375lb hanging load utilizing a minimum safety factor for allowable load of 5:1

1.75 OD Pole Pin- Plastic 3/8" 2.50OD Seasonal installations should replace tie-downConstructed of rugged black ABS plastic, this injection molded replacement plug serves as the top end pin for our 1. 75"OD side poles and center poles that have a 0. 049" wall thickness. The stainless steel pin rod measures 0. 375" in diameter and extends 4" from the end of the plastic insert. The top pin is a friction fit and is installed by hand then hammering into final position with a rubber mallet or by simply tapping on the ground.