720-0112 - Actuators - 720 Series Output - 72" Push Pull Cable This feedback potentiometer is used

This feedback potentiometer is used to detect the stroke position

This item is only used on a select group of 720 series actuators

5" rubber T-handle latch assembly with all metal having an everlube finish

1/2 inches second

720-0112 - Actuators - 720 Series Output - 72" Push Pull Cable This feedback potentiometer is used12VDC, 72" cable output, 0. 07 inches per second, no feedback, no mounting hardware. DETAILED INFORMATION Standard 720 Series actuator, which runs on a 12V source, with an output speed of 0. 07 an inch per second. Total stroke length is 3 inches, and this unit has a 72" Push Pull cable as its output. This system works via a 6 pole DPDT toggle switch. Terminal block pin out: Block 1: 12V + to motor (RED WIRE) Block 2: 12V to motor (BLACK WIRE) Block 3: